Olde Tool Workshop
“Quality tools are the key to unlocking your woodworking potential”
Menu
Spring Pole Bookshelf?
A few weeks ago, I posted some pictures of my spring pole lathe and the great progress I was making. Well, as always, life happens, and manages to alter the best laid plans of men. The lathe was to a point where it was looking really good. After chopping out the mortises, I noticed a bit of stiffness in my arm. I stopped working for the day and rested for the night. My arm was very swollen and I could not fully flex it. Where does the “Spring Pole Bookshelf” come in you may ask? Please bear with me and I will explain.
I rested my arm for a week, and took anti-inflammatories, and it was feeling better, although still a little swollen. Then, I made the mistake of using it again to install a storm door that was a Mother’s Day gift for my very patient wife. It re-injured my elbow so badly that I had to do the unthinkable; I had to cancel my Moravian Workbench class at Roy’s Woodwright’s School. I cannot tell you how disappointed I was when I realized I would not be able to physically stand up to a solid week of punishing mortise chopping, but I contacted Roy and let him know I was not going to be able to make the class.
Fast forward a couple of weeks to this past weekend, and after going to the Doctor and getting some stronger medication and a new arm brace, my injury was doing better. I decided to take it slow and do some limited work. I did some plane refurbishing, which amounted to some sanding of the sole of the plane and blade sharpening. I took frequent rests and iced my elbow after each session. I was not feeling any pain afterwards, and I could tell it was healing.
After doing some deep thinking about my predicament, I surmised that the root cause of the problem was the height of my workbench. I have not discussed my workbench a lot as it is a commercial bench I bought from Grizzly before I knew any better. It’s funny, for what I paid for this bench, I could have purchased the material for a really nice bench. I have made do with this light-weight, thin-topped, crappy-vised bench-shaped object for almost 3 years now, and I have never adjusted the height. That all changed. I reduced the height of my bench by 4 inches. I must tell you, this really made a huge difference. Planing is easier and so is sawing.
Now we get to the “Spring Pole Bookshelf” part: As I was piddling around the shop this weekend, I was cleaning, and I placed s few books on my lathe. They fit nicely on the bed and it got me thinkin’….If I cut a board the same shape as the tail stock, I could use it for a sliding bookend. This was just the small project I felt I could tackle with my limited elbow capacity.
I sawed out the block of wood and drilled a hole for a 1/2″ dowel rod and inserted the rod after placing the bookend on the lathe bed. I put my woodworking books on the lathe bed and adjusted the new bookend. I cut a wedge to set the bookend in place and it worked great; who needs a lathe when you have such a nice bookshelf! I took a few pics and then went to rest my arm and elbow on some ice.
I like this design concept and I will probably make a bookshelf similar to this after I complete the spring pole lathe. Yes, I plan to finish the lathe. This bookshelf was only a side-diversion to entertain me until I am physically able to continue the lathe project.
I will publish a list of my books in a later post. This is a combination of deliberate purchases, books I’ve had for years and lucky finds in the annual library book sale. All of the LAP or Lost Art Press books I own are definitely deliberate purchases.
One side note, I was planning on doing a “The Onion"-esque post with a title like “Traditional Woodworker Injures Self in Freak Strain-Related Accident” but decided I’m not the professional humorist like those that populate “The Onion.”
-Aaron
This entry was posted in Handmade Tools, Workshop on May 28, 2013 by OldeToolWorkshop.
Post navigation
<- It’s about time - let’s get this lathe started A Turn for the Better ->
Search the Olde Tool Workshop Site
Search for:
Subscribe to Blog via Email
Enter your email address to subscribe to this blog and receive notifications of new posts by email.
Email Address
Subscribe
Recent Posts
- Why We Do It: A Reflection on Traditional Hand Tool Woodworking
- Should You Upgrade to Stanley Bedrock Planes?
- “A Marriage of Convenience”
- Hickory Bark and Ash Stool
- Plane Catalogs - And Other Resources
My YouTube Channel
Like me on Facebook
Recent Comments
- William Henderson on “A Marriage of Convenience”
- reed on “A Marriage of Convenience”
- Beth Henderson on Tool Chest Dump
- Will Myers on English Layout Square
- OldeToolWorkshop on A Bad Day
Archives
- July 2025
- June 2023
- April 2022
- August 2021
- January 2021
- December 2020
- November 2020
- May 2020
- February 2020
- January 2020
- September 2018
- May 2018
- December 2017
- November 2015
- October 2015
- September 2015
- March 2015
- January 2015
- July 2014
- March 2014
- June 2013
- May 2013
- February 2013
- December 2012
- October 2012
- September 2012
- August 2012
- June 2012
- May 2012
- April 2012
Categories
- Furniture
- General
- Greenwood Projects
- Handmade Tools
- Leather
- New Tools
- Tool Chest
- Tools
- Uncategorized
- vintage tools
- Workbench
- Workshop
Blogroll
- Lost Art Press
- Chris Schwarz’s Blog
- Joel’s Blog at Tools For Working Wood
- The Saw Wright
- WK Fine Tools
- Ron’s Sharpening Blog
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OkNo
You can revoke your consent any time using the Revoke consent button.Revoke consent
Coffee donations not active yet
Olde Tool WorkshopWe sincerly appreciate your support.
Use WeChat to scan the QR code and complete your donation.
