Olde Tool Workshop
“Quality tools are the key to unlocking your woodworking potential”
Menu
It’s Not all about wood over here
As woodworking is my main hobby, obsession, meditation etc., I do not usually venture in other crafts … usually. But I have recently been contemplating a journey into the wild and wonderful world of leather work. This is mainly a desire to make items for my tools such as sheaths and various means to protect my tool’s sharp edges from each other and my skin.
I have several cases and sheathes I have purchased or inherited and I still have several items that need to be protected. I have some Axes, adz’ and drawknives in dire need.
This was all pretty back burner stuff until I saw this article on “The Art Of Manliness” website. This is a great site for all men, young and old who want to get in touch with their inner manly self. The article describes how to build a wallet that will last the rest of your life. Not the flimsy crap you buy in a store that look great until you put stuff in it and actually use it. I knew I could make this wallet. It had a template and great instructions.
I do have some limited experience with working leather. Growing up, my neighbor was a multitalented and incredibly smart man. One of his hobbies was leather working. He made his own trick roping saddle which was beautiful and very functional. He graciously and patiently taught me to do basic stuff like tooling and dyeing. I made a belt with my name on it (i’m sure I wore this belt out). This was a very fond memory because he took the time to help a curious and eager youngster learn to craft leather. He is gone now but definitely not forgotten. His attention to detail and drive for excellence have influenced me ever since.
After deciding to make the wallet, I went over to my local Tandy Leather Factory and purchased some leather and other supplies to do the job. First off, at Tandy you cannot buy just 1’x 2′ piece of leather. They offer large pieces, scraps or kits. I chose scraps as they had some 3-4 oz. scraps big enough for this project. With supplies in hand I went home and started working.
The first thing I had to do was to print out the pattern in the correct scale. The plans say you can print it full size on 11×17 , I suggest you have it printed at a place like Kinko’s if you want to make one. I finally printed the plan in 4 sheets and taped them together. I then cut out the individual pieces and used them as the cutting guides for the parts. I actually used pushpins (in the hole locations on the corners) to attach the plan and leather to a board and then used a steel rule to cut them out. Also I had a old leather awe I bought, mistaking it for a bird cage awe, and it worked great in puncturing holes for the stitches.
After completing this project, I decided I can do leather work and that I actually enjoy it quite a bit. I love hand stitching! Who knew? In the vein of my original intent to make woodworking add-ons I made the small tool sheath for my Veritas Plow plane blades seen above. This was from the scraps I had left over from my wallet project. Now my blades do not have to hang out in the disgusting duct tape holder they were in, yuck!
I have since purchased some more tools and supplies and some more leather. I decided it would not do to have my new leather craft tools knocking around in a box, so I hastily added a tool rack to my repurposed Clementine box and the picture below shows the result. This is a temporary solution, but so far it is proving quite convenient. I see a new woodworking shop project in my future, after I build my spring pole lathe of course.
-Aaron
This entry was posted in Leather on February 11, 2013 by OldeToolWorkshop.
Post navigation
<- English Layout Square First Step ->
Search the Olde Tool Workshop Site
Search for:
Subscribe to Blog via Email
Enter your email address to subscribe to this blog and receive notifications of new posts by email.
Email Address
Subscribe
Recent Posts
- Why We Do It: A Reflection on Traditional Hand Tool Woodworking
- Should You Upgrade to Stanley Bedrock Planes?
- “A Marriage of Convenience”
- Hickory Bark and Ash Stool
- Plane Catalogs - And Other Resources
My YouTube Channel
Like me on Facebook
Recent Comments
- William Henderson on “A Marriage of Convenience”
- reed on “A Marriage of Convenience”
- Beth Henderson on Tool Chest Dump
- Will Myers on English Layout Square
- OldeToolWorkshop on A Bad Day
Archives
- July 2025
- June 2023
- April 2022
- August 2021
- January 2021
- December 2020
- November 2020
- May 2020
- February 2020
- January 2020
- September 2018
- May 2018
- December 2017
- November 2015
- October 2015
- September 2015
- March 2015
- January 2015
- July 2014
- March 2014
- June 2013
- May 2013
- February 2013
- December 2012
- October 2012
- September 2012
- August 2012
- June 2012
- May 2012
- April 2012
Categories
- Furniture
- General
- Greenwood Projects
- Handmade Tools
- Leather
- New Tools
- Tool Chest
- Tools
- Uncategorized
- vintage tools
- Workbench
- Workshop
Blogroll
- Lost Art Press
- Chris Schwarz’s Blog
- Joel’s Blog at Tools For Working Wood
- The Saw Wright
- WK Fine Tools
- Ron’s Sharpening Blog
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.OkNo
You can revoke your consent any time using the Revoke consent button.Revoke consent
Coffee donations not active yet
Olde Tool WorkshopWe sincerly appreciate your support.
Use WeChat to scan the QR code and complete your donation.
