Author Archives: OldeToolWorkshop

Got me some SYP

As I mentioned in my first entry for the Spring Pole Lathe, I will be making regular updates on my progress for this project.  We had company this weekend and I had the pleasure to share some shop time with my new friend who’s name is also Aaron.  We had a blast and I hope he had as much fun as I did.  After our guests continued on their vacation, I decided to go to my favorite lumber store, Capital City Lumber, and purchase the southern yellow pine, or “SYP,” for this project.  Much to my dismay, they do not carry dimensional SYP.  I could not believe it, then I remembered I bought some SYP at my local Home Depot for our raised bed garden last year.  Armed with this information I headed straight for the nearest Home Depot.

If you have never purchased or worked with SYP, then let me tell you, it is heavy stuff!  I remember the 2x10x12s I bought last year were really heavy.  This time I was buying 2x12x12s and they are almost too heavy for me.  I had a lot of difficulty choosing boards because they were so heavy and the selection was less than desirable.  I settled on two boards and used the cut list I had prepared to have them cut the boards to a more manageable size.  I loaded up the boards and headed home.

Once home, I had some additional cutting to do on the table saw.  I know, I know what you are saying:  “You used a power tool?”  But 24+ feet of ripping 2x stock is not what I consider fun.  Please remember even the olde timers had access to sawmills and were able to buy pre-dressed stock.  This is just a modern sawmill.

After I had rough cut all my stock to length and width, I created a lettered parts list and a cut diagram from the drawings.  Next it was time to surface plane.  When I said that this lumber was less than desirable I mean, among other things this lumber was dirty.  I do not have a thickness planer so I hand-surfaced the stock with a non-valuable junk plane so as to protect the sharp blades of my good planes.  As you can imagine, we are taking about 10s of linear feet here so this will take me a while to finish.  This is just as well as this stock is a little wet.  Once planed, the stock looks really nice, see the before and after pics below.

Clean on the left and needs work on the right

One other thing, I purchased two “Gramercy Hold Fasts” from “Tools For Working Wood” on Friday and they were delivered on Monday.  A hold fast is a clamping device used on a bench in predrilled holes and is very convenient for holding stock while chieseling, sawing, and chopping mortises to name a few.  I added small pieces of leather to the flat ends to help keep from marring my work pieces.  Here is a picture of the hold fast in and out of the bench hole.

One interesting factoid about these is they work better in thicker benches (The manufacturer suggests a minimum of 2″) and not so much in thinner benches.  My bench is very thin, it is 3/4″ and only have one hole bored that is about 5″ deep.  I had figured that the 5″ inch hole would work best and the thinner ones would be useless.  As it turned out the thinner ones work best.  I think the 5″ hole may actually be too deep.  I do not want to use them too much on the thinner holes as the hold fasts will probably damage them.  I will add a piece of leftover oak flooring to the back of my bench to give the holes more thickness, making them stronger and less likely to be damaged.

When I complete the workbench class this spring, I will finally have a bench made for traditional woodworking and the hold fasts will have a nice place to play.

Stay tuned for more, later, on the SYP and spring pole lathe.


First Step

André Roubo's illustration of a Spring Pole Lathe

You know the saying:  “Every journey begins with the first step,” well this is true for my woodworking projects as well.  Last month I attended the MWTCA tool meet in Hillsborough, NC and I purchased a old loom shuttle for $5.00.  If you are not familiar with loom shuttles, they are used to pass the horizontal thread through the vertical threads and they have steel cone shaped points in each end.  It is these points that I am interested in as centers for my upcoming project – a Spring Pole Lathe.  These points make excellent dead centers as they are perfectly round and smooth.  I did not mind destroying this particular shuttle because it was made out of some sort a laminate and was not very old.  I would have had a much harder time bringing my self to destroy a wooden antique, even for a good purpose.  One other plus, I was able to re-purpose the spool in the shuttle as a leather burnisher.  It works great for this task.

What is a “Spring Pole Lathe” you might ask.  A lathe is a machine used to turn round objects like spools, spindles, bowls and tool handles.  A Spring Pole Lathe is a more traditional type of lathe that has been around for 1000’s of years.  This is a reciprocal, driven by a cord wrapped around the piece being turned, and only cuts on the down-stroke of the foot treadle.  There is more information at the end of this article about this amazing tool.

Back to the shuttle points.  Well, saying that they were smooth is stretching it a little; they had a very light coat of rust.  Fortunately, they have a nice 3/8″ shaft and mount in a drill chuck perfectly.  A few minutes with course to finer sandpaper and they will have a nice smooth finish.  I hope to provide each step in the lathe building process in as much detail as possible to show how this is built.

I will be using Roy Underhill’s plans for a breakdown model for easier transport.  I have been planning to build this for some time and I have just finished a lengthy house project and I have promised myself that the lathe is my next major woodworking project.  I know Roy is tired of me asking tons of questions about the design.  I just want to have a usable tool that I will get many years usage out of.

Here is the online information and some pictures of the lathe.  The Woodwright’s School has a class on making the lathe Making the German Spring Pole Lathe with Roy Underhill.   I have enough experience now that I should be able to make this myself without the class.

Here is a link to the Wood Turners of Virginia’s web site. This is the plan I will be using to make my lathe.

Here is a link to a Lee-Valley article about spring pole lathes and some of their history:

The Woodwright’s Shop featured the spring pole on a couple of episodes, but the one I am making was shown on Season 24 episode 5.  Unfortunately that episode is not currently available online.

My son Will with Roy being Roy

The picture on the left is Roy, who was helping my daughter, Malena, with her turning.  This was taken in Jan. 2012 during the Lie-Neilson tool event at the NCSU Crafts center. The picture on the right is my son, Will, and Roy being Roy at the Jan. 2013 Lie-Neilson tool event at the NCSU Crafts center.  Kids change but Roy stays the same.

The wood that I plan on using is strong, hard, cheap and plentiful SYP, or Southern Yellow Pine.  This stuff is heavy and strong.  It is a good choice for this lathe, and it available most anywhere in my area.  I will be getting my supply from Capital City Lumber, local in Raleigh.

I cannot wait to get started and I hope you will join me in this fun, and useful project.


“Keep those Olde Tools sharp”

It’s Not all about wood over here

As woodworking is my main hobby, obsession, meditation etc., I do not usually venture in other crafts … usually.  But I have recently been contemplating a journey into the wild and wonderful world of leather work.  This is mainly a desire to make items for my tools such as sheaths and various means to protect my tool’s sharp edges from each other and my skin.

I have several cases and sheathes I have purchased or inherited and I still have several items that need to be protected.  I have some Axes, adz’ and drawknives in dire need.

This was all pretty back burner stuff until I saw this article on “The Art Of Manliness” website.  This is a great site for all men, young and old who want to get in touch with their inner manly self.  The article describes how to build a wallet that will last the rest of your life.  Not the flimsy crap you buy in a store that look great until you put stuff in it and actually use it.  I knew I could make this wallet.  It had a template and great instructions.

I do have some limited experience with working leather.  Growing up, my neighbor was a multitalented and incredibly smart man.  One of his hobbies was leather working.  He made his own trick roping saddle which was beautiful and very functional.  He graciously and patiently taught me to do basic stuff like tooling and dyeing.  I made a belt with my name on it (i’m sure I wore this belt out).  This was a very fond memory because he took the time to help a curious and eager youngster learn to craft leather.  He is gone now but definitely not forgotten.  His attention to detail and drive for excellence have influenced me ever since.

After deciding to make the wallet, I went over to my local Tandy Leather Factory and purchased some leather and other supplies to do the job.  First off, at Tandy you cannot buy just 1’x 2′ piece of leather.  They offer large pieces, scraps or kits.  I chose scraps as they had some 3-4 oz. scraps big enough for this project.  With supplies in hand I went home and started working.

The first thing I had to do was to print out the pattern in the correct scale.  The plans say you can print it full size on 11×17 , I suggest you have it printed at a place like Kinko’s if you want to make one.  I finally printed the plan in 4 sheets and taped them together.  I then cut out the individual pieces and used them as the cutting guides for the parts.  I actually used pushpins (in the hole locations on the corners) to attach the plan and leather to a board and then used a steel rule to cut them out.  Also I had a old leather awe I bought, mistaking it for a bird cage awe, and it worked great in puncturing holes for the stitches.

After completing this project, I decided I can do leather work and that I actually enjoy it quite a bit.  I love hand stitching!  Who knew?  In the vein of my original intent to make woodworking add-ons I made the small tool sheath for my Veritas Plow plane blades seen above.  This was from the scraps I had left over from my wallet project.  Now my blades do not have to hang out in the disgusting duct tape holder they were in, yuck!

I have since purchased some more tools and supplies and some more leather.  I decided it would not do to have my new leather craft tools knocking around in a box, so I hastily added a tool rack to my repurposed Clementine box and the picture below shows the result.  This is a temporary solution, but so far it is proving quite convenient.  I see a new woodworking shop project in my future, after I build my spring pole lathe of course.




English Layout Square

I hope you had a nice Holiday!  I sure did.  I got a chance to spend some quality time in the shop the last few days.  This English Layout Square is a project I have been meaning to take on for some time, but just never got around to it.  After seeing the re-run of the Woodwright’s Shop online where Roy and Chris built this, I had to make one too; it looked like too much fun to pass up.

I stopped by Home Depot for some errands and decided to get a 1/2″ piece of poplar to do this English Layout Square.  I knew it would not take long to build and would be a fun project.

This project was also published in the December 2010 issue of Popular Woodworking, and there is a free Sketchup drawing available as well.  That is what I used as a reference and I was able print out the nice curves, and transferred them to templates which I made out of some scrap maple.

It took me two days to complete the square and another day to tune and apply the finish (boiled linseed oil and paste wax topcoat).  I also took the time, while the linseed oil was drying, to make the holder out of some cherry and scrap poplar; it really accents the square and keeps it secure on the wall.

This may look like an easy project, but it did challenge my budding skills.  First, I had to make some pretty accurate cuts on the half lap joints.  Then, clean them up with the router plane…I love the router plane; it makes flattening cheeks on a half lap possible.  I also got to use my shoulder plane to true the shoulders and really make a clean joint.  I also had to cut out the areas between the horizontal stretcher with a saw and chisel – this is harder than it seems.  The final challenge was the half laps on the legs.  You cannot just saw these out.   I used a saw to cut 3/4 of the way and used a chisel to remove the bulk of the waste and then switched to the router plane once again to flatten it out.

After all that cutting and fitting, my joints were flat and tight.  I am really pleased with this square and hope to get many years of use out of it.

Here is a picture of the square out of the holder.

I spent s little more of my Holiday thinking about future projects.  For a Christmas present to myself, I bought John Alexander’s “Make a chair from a Tree” DVD video how-to, and I also bought a used copy of the book which is out of print  (real pricey) second edition book by the same title, originally published in 1994.  I am inspired to make some chairs from newly dead trees and start a whole new aspect of my woodworking journey.

Here is another book I own that was also authored by Alexander, as well as Peter Follansbee, titled “Make a Joint Stool from a Tree.”  For the project in this book,  I will need to complete my lathe first in order to make the legs…but it is on my to-do list.


A Good Day

Mystery Mallet, Popular Woodworking, Saw Box

You know, woodworking is so much fun.   I just love the chance to carve up some wood with sharp tools and a little skill; after which, you have something new that you made, and can be proud of.  After my previous weekend escapade (see A Bad Day post), I was in the need of some serious fun.  The chance came in the form of a class at Roy Underhill’s Woodwright’s School.  I was scheduled for the Mystery Mallet class on Saturday.  This is a whole day class where you make an intriguing and beautiful woodworking puzzle.  The class fit the bill perfectly to balance the experiences of the previous weekend.

Whenever I take classes at the Woodwright’s School, the time passes so quickly.  I guess that is a good indication that I am having a good time.  My neighbor, Bob, and I signed up together for this class.  I always enjoy taking classes with Bob as he provides both humor and frankness to any situation.

My neighbor Bob listening intently

Roy really does a great job of teaching and making you feel at ease.  He is very supportive, and I always learn some new technique or tip to help me improve my skills.  I was a little nervous about taking this class as it does require some precision cuts, and as I mentioned in my last blog,  sawing is one of the areas where I need more experience.  It turned out that my nervousness was unfounded, as Roy showed us some techniques that help keep your cuts clean and straight.

Roy attempting to teach me how to saw

For the most part, the day went very smooth.  I was pleased to see that I was able to do all the cuts very accurately, and I did one the best mortices I have ever carved.  This really gave me a lot of confidence for what was to come.  I was also pleased with the pace of my progress; I was keeping up with the class.  You see, I like to take my time in woodworking, so sometimes I lag the class.

At lunchtime, we ate at the S&T Soda Shoppe (they make the best milkshakes in the world).  This is always a great way to slow down and discuss the class and other topics with Roy and to get to know your classmates.   I also saw Will Myers there; he is the instructor for the Moravian Workbench class that I am scheduled to take in June.  I had met Will in a previous saw sharpening class taught by Bill Anderson.

After lunch, I went to Ed Lebetkin’s tool store.  Boy, this place is wonderful, but care must be taken to not empty my bank account.  My wife, Beth, is pretty understanding, and knows when I go there I usually buy a tool….or five.  This time, I only bought a 24″ folding rule and a #12 hollow moulding plane.  This was money well spent as I needed both of these items.  The #12 plane was a match to my #12 round moulding plane that I already own.  Fortunately, I was through with my purchases when I heard Roy hitting the ceiling with a board, announcing class was commencing.  I hurried downstairs to the classroom, not wanting to miss one minute of class time.

I saw the way

I did not mention it before, but there is some risk involved with this project; it can just “explode” during final assembly.  I know it sounds a bit dramatic, but that is exactly what happens sometimes when assembling these mallets.

Back in the classroom, the class proceed as scheduled until Roy stopped the class to assemble a student’s mallet.  The whole class held its breath as Roy and the student drove the handle into the mallet head.  They finished, and the handle bottomed out; now the moment of truth:  Time to release the vice holding the mallet head.  If everything is good, there will be silence; if not, there will be a “CRACK!”  Fortunately for the student it did not crack and it looked good.

I finished mine next.  I followed Roy’s advice and made all the necessary adjustments to the handle.  I fit it in the top as a test and everything looked good and not a bit tight.  Roy asked me if I wanted to proceed and I said “Yes…” and then he said “You know it could go very wrong,” and I said “Let’s do this” and he said “OK….”

We started hammering away at this thing and it was slowly proceeding, moving very little with each mallet blow.  Roy stopped for a second since we had stopped progressing and decided to get out the Big Mall.  We proceeded to hammer away at it until it bottomed out.  Then we removed it from the vice and found that there was a section that had caught and split off.  Roy knocked it back in place and pronounced it done.  Not planning to actually use this mallet for wood working, it looked pretty good with only a small crack where it had split.  Roy said with some block planing and a little wax (a lot as it turned out), it would look great.

Roy be-knighting me

The rest of the class finished up in short order; all did a good job on their respective mallets.  I had Roy sign the Popular Woodworking article featuring the “Mystery Mallet” and we said our goodbyes.  All in all “A Good Day.”  As I previously mentioned, my next class is in June and it is a five-day class, after which I will have a great workbench.

That week cannot get here soon enough!


p.s. Roy wrote a great article about how to build a “Mystery Mallet” for Popular Woodworking (April 2012 issue # 196) pictured in the beginning of this blog post.

A Bad Day

A Perfect Mitered Dovetail?

Is there such a thing as a bad day in the workshop?  I guess if you gouge yourself with a “pig sticker” or slice yourself with a knife, these could be considered bad days.  This is not what I am talking about here.

Some days, the good and the bad are not balanced, and you end up with more of one than the other.  Yesterday was definitely one of those days.   It all started out innocently enough.  I’ve not had the opportunity to work in the shop for a few weeks…seemed like forever…but I wanted to continue with the moulding for my Saw Box.  I had completed the shaping of two mouldings with my desired profile, and all I had to do was the mitered dovetails and wrap the bottom of the box – then I would be golden.  As I had done this for the lid sans the molding profile, I felt pretty confident that I could do the same for the bottom skirt.

I proceeded to cut the two pieces of one on my moulded boards, and, because it had a knot in it, I could only use specific lengths.  I had plenty of room for mistakes (or so I thought).  I was going to put the pins on the opposite side of the main carcass (on the skirt this would be the short-end side), so I started laying out the joint of the short piece.  Everything was going well up to the point where I started cutting the pins in the long piece….then I made a rookie mistake.  I did not mark an X on my waste piece and I cut into the pin side of the pin and not the waste side.

I say “rookie mistake” because I did this exact same thing on my first dovetail at Roy Underhill’s Woodwright’s School in May of 2011.  I even kept the miscut corner joint from the class as a “reminder.”  Clearly I needed a refresher.

Ok, lesson learned,  here is a new mantra:  “Always mark your waste … ALWAYS.”  After this mishap I thought:  Well, this is my one “gotcha” today and everything should be ok, right?  Wrong!

I had to cut a little more off than the width of the dovetail joint on the long piece of molding.  I roughly measured the length on the Saw Box to make sure I had enough material and proceeded with my second attempt at the joint.  I was set now as I had just cut the most beautiful, best fitting and square dovetailed miter joint known to man!  I took it over to my Saw Box, put it up against the side, and said to my friend, Bob, jokingly:  “I sure hope it’s long enough.”  It was short by about 3/16 of an inch.  How my heart sank.   This meant that I not only had to redo the dovetail, but I also had to create a whole new moulding piece.

Oh the Sorrow!

Second newbie mistake of the day:  “Measure twice and cut once.”  Wow, I was batting a thousand.  You would think given the way this day was going I would quit there, but no; I had to forge on.  I haven’t had much time to get in the workshop lately, and I had to make the best use of my time.  I decided to at least cut out the material and form my new moulding before quitting for the day.

I had a 2×12 board that had a knot-free edge wide enough for the ~2 inch board I needed for the moulding.  I marked it with my marking gauge and proceeded to cut it out with my trusty old Disston rip saw.  I normally like to cut my pieces a little wide and plane them down to size because my hand ripping is not the most accurate…but it was getting late and I decided to rip close to the line.  At first glance, it looked like I finally did something right, but upon closer inspection I noticed I had angled my saw such that I was within the line on the top but shy on the bottom.

Third and final lesson of the day:  “Do not take shortcuts on clear materials.”  It’s ok to experiment on crappy material to try to improve your technique, but if you are unsure of an operation, do not try it on a nice piece of wood just to save time.

Given all the above,  I think I should have stopped after the second problem and walked away for a while to reflect on what I was doing.   I was also lucky I did not injure myself.  It is hard to walk away, as I really enjoy my woodworking time, and I like to take full advantage when I can.  But the price paid could have been more than just wasted time and material.

This makes me think about the adage:  “A bad day in the workshop is better than a good day in the office,” well maybe not always.




Mitres, Dovetails and Lid

With some trepidation I went headlong into the fabrication of my Saw Box lid.  The challenge came from the the geometry of the corner joint for the lid.  By mounting the top board in a groove in the frame boards, the only way to conceal the groove would be to use a mitre joint.

The big problem with ordinary mitre joints is they are weak and do not offer a lot of glueing area.  This is the reason I chose the mitered dovetail joint.  The mitre hides the groove and the dovetail gives the joint strength.  I have never cut this joint before, I have only seen Roy Underhill cut these on his 2-episode show on the Woodwright’s Shop where he made a Joiner’s Tool Chest and used this type of joint for the same reason as I was going to use it.  My effort was a process of trial and error; my first one was ok, but it had a few extra unnecessary cuts.  Fortunately I foresaw this difficulty and planned ahead with extra long stock, which gave me a couple of tries for each piece.  When it came to cutting the critical second cuts on each board,  I was getting pretty good at it.

Here is a drawing of a mitered dovetail joint I found on Mike Ogdon’s now defunct blog on dovetail joints.

The mitered portion of my corner joint is a bit wider than shown in the drawing, in proportion to the dovetails  in the frame boards of my lid.

One other design choice that I made for the lid was to orient the tails to show on the front and the pins on the side.  This was done so as the the top board expands it will not “blow out” the dovetails.  I have allowed some expansion room in the top, so this is just a little added insurance.

Keep in mind I have not glued this top assembly up yet.  I will not be putting glue in the grooves for the top board,  I will leave it “floating” and I will be gluing only the frame joints. Here are a couple of pictures of the box with the lid on it and opened like it would look with hinges attached.

I have also ordered my butt hinges and handle from Horton Brasses which should be here in a few days.  Next time, I should have a special treat with a video of my first attempts to do molding on mitered dovetails for the skirt.


Tills and Bottoms

This was a very productive week with my Saw Box.  I finished the main carcass of the box; I tuned and fit the dovetails, glued it up and attached the bottom board…twice (more on that later).  I ordered and received my hasp from Lee-Valley tools.  This is a big chunk of brass, and it will look great on my saw box.  I still need to order the hinges and handles from Horton Brasses.

My one setback was that I had to redo the bottom board.  I nailed the old one in place but I did not like the look and fit.  I had rabbited the four sides to fit up in the box.  My Lee-Valley moving fillister plane was set correctly, but I evidently did not tighten the depth- stop adequately.  When I was planing away, I made my second mistake; I did not check the depth with my Starrett 6 inch combination square and I ended up with a 1/2″ deep rabbit, where I had set the depth for 3/8.”  I also set the width of the rabbit too wide, so when I put the bottom board in the box there was about a 1/8″ to 3/16″ gap all the way around the inside bottom.

I have a mantra:  “If I settle for good enough then my skills will never progress.”  I decided to replace the bottom.  This meant that I had to take the old bottom out and remove the cut nails.  I have to say, the cut nails hold very well.  It was quite hard to remove the nails from soft pine.  This is good news, as I have used these for my projects extensively, and I am glad to report that they live up to their reputation. The nippers I acquired, upon the recommendation of the ATC tool list, worked very well to remove them.  I straightened the bent nails and used them again for the new bottom board.  This is in keeping with tradition where nails were so valuable that they were often recycled.

In my previous post I showed pictures of the till before it was completely cut out.  I have now cut it out and it fits nicely in the dados I have put in the side boards before the assembly.

Here are some pics of the Saw Box at this stage.

Have Saws, Will Travel

A few Saturdays ago, I attended the Midwest Tool Collector’s Association (MWTCA) tool meet, and finished acquiring all the tools listed in The Anarchist’s Tool Chest (ATC) book, yea!  I can fit almost all of my tools in my traveling version of the ATC, except my saws.  So I got to thinking that I currently did not have a good way to store or transport my saws.   During the MWTCA tool meet, I saw an old military ammo crate that would have almost done the trick.  I did not buy the crate…because I thought it would be more fun to build my own!

On Sunday, my daughter and I went to the local home center to pick up a 1x10x8 board.  Before I actually started to cut wood,  I needed to prototype the till to make sure it would work for me.  I read in the ATC that Chris Schwarz needed to tinker a bit with his design before committing it to wood, so I fashioned a version from scrap wood, roughly following Chris’s design in the ATC.  The big difference in mine was that I decided to make it for 7 saws instead of 4.  My decision to build a bigger one was based on this reasoning:  If I take it to a class that is not saw-focused, I can just load it with the standard 4 saws:  Rip, Crosscut, Dovetail and Carcass.  If I take it to a saw sharpening class, I can load it up with multiple saws to be worked on.  Plus, at home, it will maximize storage.

Here is a pic of my prototype saw till.  It is smaller than the actual till, but it was a great proof of concept.

Prototype dimensions are 6″W x 6″H x 3/4″ with 3/4″ saw cuts for the saws and a offset 2 1/2 radius circle. The two till boards are spaced 6 1/4″ apart


After using the prototype till for a while, I designed the box around it, while allowing for some extra room.  I made my production till 8″ wide and 8″ tall and made of pine.  I made my saw cuts 1 3/8″ apart, keeping the saw handles and blades 5/16″ apart at their closest on each side.

So, here is my saw till.  The 3″ radius semi-circle cut in the top, allows the back saws to be level with the panel saws.

Production dimensions are 8″W x 8″H x 3/4″ with 1 3/8″ saw cuts for the saws and a 3 radius circle. The two till boards are spaced 6 1/4″ apart



Below is a pic of one of my finished dovetailed corners of the saw box.

Perspective of one finished dovetail corner with prototype till “inside” it

More to come soon …


Tools, Tools, Tools!

On Saturday the 15th of September, my brother, Berry, and I went to the Mid-West Tool Collectors Association annual tool meet here in Raleigh, NC.  This is one of my favorite meets as it is not far from my home, the weather is usually not too hot, and there are tons of tools and experts to tell you all about them.

Here are some of the highlights of this years meet:

  • An Estate sale with a lot of different quality levels of tools and lot of bargains
  • Lots of vendors
  • A talk from a couple of members about the “Antique Roadshow” and “American Pickers”
  • Bar-B-Que otherwise know here in this area as a “Pig Pickin”
  • A tool auction

I love the excitement of the meet and how everyone loves to talk tools.  I learn so much, and like to talk to the “Old Timers.”

Height Adjustable Cast Iron Legs

The real action for me this year was the Estate Sale.  The prices dropped throughout the day, and if your item was not snatched up before it got to your desired price, you could get some pretty good deals.

I purchased several items during the meet (I’ll spare you the detailed list) but the one that has the most potential is:

A set of iron workbench legs

I know they don’t look like much now, but when I get them sand-blasted, painted and installed under a marble or stone slab it will be a whole different story 🙂

Now just 362 more days (give or take) until the next meet.